Refinish Your Bathtub the Easy Way


Bathroom remodeling at a modest cost with desirable results can be achieved through bathtub refinishing. If your tub is starting to show its age, do not feel like your only course of action is to have it replaced, you may want to try a refinishing bathtub guide. This is a much more cost-effective solution, and it is not as difficult as you may think. You even have the option of choosing a liner that can be glued over the surface of your tub, or sanding it down and adding a coat of refinishing. Our bathtub refinishing guide sponsored by: will provide you with a brief step by step refinishing bathtub guide to help you get started:

The first thing you need to do when refinishing bathtub fixtures is to assemble the tools that you will need, many of which can be found in bathtubs refinishing kit. These include a spray gun, a face mask or respirator, sandpaper, masking tape, paper, epoxy paint or re-finisher, acrylic top coat, chemical cleaners, and a bonding agent. Now to get the best results you should clean the entire surface of your tub. Once you have refinished, you should rinse it off thoroughly and then give it plenty of time to dry. If you are in a hurry, then go ahead and use a hair dryer to help it along.


The subsequent step in the process is to sand down the surface of your tub to rough it up a bit and make the surface even. This will make it easier for the paint to cling to the surface. At this point, you should also cover up any surfaces that you do not wish to paint with masking tape.

Finally, you can put on your first coat of paint. It is recommended that you use an EP acrylic which produces a finish that is highly durable and resistant. Another great thing about this type of paint is that it is available in wide range colors so it will be easy to find one that matches the exact color of your bathtub. The kit that you purchase should contain some instructions on how to mix your primer so make sure that you follow them closely. When applying the first coat, use your spray gun to achieve an even layer by using a constant back and forth motion. It is a good idea to test this out first on cardboard.

When you are finished applying the desired number of coats, give it about 48 hours to dry before using the tub again.

Read more at our bathtub refinishing blog.

What to Look For in an Internet Marketing Consultant


Sooner or later an online marketing campaign will fail to deliver. This is particularly the case if no more sales are generated and brings potential worry even though all the marketing techniques have been exhausted. Should this occur, one can consider hiring an SEO and internet marketing company to help out.
Before hiring a web marketing consultant in San Diego, however, some things should be considered before committing fully. In doing these particular considerations, it will assist in bringing down cost and eliminating unnecessary expenditures. A good checklist of what is required to do before hiring should be followed.
At the top of your list should be an item regarding skills and skill sets. Look over the employee profiles of your company and see if there exist the necessary skills to do the job internally instead of getting outside help. If it does not exist then, this can be a factor in the hiring of a consultant.
Next to consider is knowing exactly what you want or need to happen. A majority of companies have a very general or broad idea of what they want to occur following an online campaign. The outside expert you hire is only as efficient and precise as the plans you have in mind.

internet marketing
The expertise of the outside expert you have in mind should also factor in your final decision. Check the references and background of the person you have in mind of hiring. Likewise, look at the achievements and the client references carefully to see if he or she is as capable as he or she purports to be.
An important all around consideration if hiring from the outside is cost. This is a cost regarding monetary payments. Will you or the company be able to shoulder the additional expense? Cost can also be incurred regarding lost man hours as you will be assigning someone to show the consultant the ropes for the first few days or weeks.
And last of all to consider is the workability of the final recommendations made. Most companies waste a lot of money in hiring an outside expert yet do not even implement the ideas given, no matter how feasible. Thus, the problem of implementation after the consultancy phase should be looked at regarding who will be able to do it and how long. Most companies fall into this trap of not being able to implement what has been consulted on, thus resulting in lower morale for those involved.


How Tape-In Hair Extensions Work

Tape-in hair extensions not only give thicker, longer and shinier hair but they also give you that natural look that weaves can’t. The hair extensions allow you to wear different hair styles any day you want to. They feature completely flat bonds that lie against the head hence do not look fake at all. It’s best to find a local hair extensions specialist to install them, but they are extremely easy to put on and remove. Research the internet tro find the best extensions profile that is focused on customer service. Contrary to common belief, the extensions do not cause damage to your natural hair. This brief overview looks into how you can install tape in hair extensions at home.


How to Install Tape in Hair Extensions

· Wash Your Hair- First wash the hair as dirty hair causes wefts to come out easily.

· Section Bottom to Top- Start from the bottom of the scalp and section you hair moving up. The first row should be an inch from the bottom of the scalp. Use a comb to part hair evenly and then pull the top half up and then secure it while leaving the bottom hanging down.

· Use a Thin Section of Hair- Gather a very thin section of hair that will be sandwiched between extensions. The adhesive tape on the top extension should touch the bottom extension to ensure they stick together. The section should be even and as wide as the extension wefts.

· Attach Extension- You can now press the bottom and top wefts together for about 20 seconds to make sure they are stuck together. Repeat the process avoiding gaps and do not place the weft too high rest they are visible.

· Cut and Style- You can now blend your hair into the new extensions and style it as you wish. The length of the hair should fade into the length of the extensions nicely.

You can consider using a friend to assist you or use two mirrors in order to see the back of your head. It is very important to consider the placement of your extensions as you should not put the extensions too close to the edge of the scalp to avoid them been seen. As you are sandwiching a layer of hair between extensions, ensure the sticky part on top and bottom stick to ensure maximum adherence.

To pull off a seamless look it is important to match hair density, color, and thickness while shopping. Ensure the extensions are 100% human hair to ensure the hair cuticle is intact and is facing the same direction. Human hair extensions are easy to style, iron, dry as they do not tangle.

You can maintain a stylish and flawless look with tape in hair extensions.

Looking to increase your Sales?

Our San Diego SEO Specialists have a track records for delivering results. With so many options for locals and tourists alike, you will likely never be discovered if your not on the 1st page of google. In today’s day and age the first place people go to look for or research a company is online. Google dominated 95% of search engine queries. Make sure your visible online by requesting a free video analysis today!